Xplorer2 Ultimate 4.5.0.1 (64-bit) 軟體資訊介紹&下載

ADVANCED Codecs,軟體教學,軟體下載,電腦問題,電腦教學
ADVANCED Codecs 為 Windows 7/8/10 是一個音頻和視頻編解碼器包。包括 32 位和 64 位版本。 ADVANCED 版本包含一整套編解碼器,標準編解碼器只包含 LAV 濾鏡和用於字幕的 xy-VSFilter.6235896
對於大多數用戶而言,編解碼器一直是個問題。這是因為從來沒有一個“開箱即用”的工作解決方案,一般的電腦用戶可以安裝,只是從一開始就正常工作。有幾個體面的編解碼器包解決方案,但他們沒有做我想要的一切。我總是需要調整,調整,甚至是重新安裝,以獲得我所需要 / 需要的編解碼器,大部分時間,文件仍然無法正常播放。這種挫敗感是我開始製作一個適用於所有播放器的 codecpack 的基礎.

注意:在安裝這個簡潔而全面的軟件包之前,安裝程序會自動從您​​的電腦中刪除大多數其他流行的編解碼器版本.8997423

ADVANCED Codecs Screenshot 1
ADVANCED Codecs Screenshot 2

Xplorer2 Ultimate 4.5.0.1 (64-bit)

xplorer2_setup64_ult.exe

2.8 MB

Windows 7 / Windows 8 / Windows 10 / Windows 7 64 / Windows 8 64 / Windows 10 64

免費軟體

Shark007

2020-10-25

What's new in this version:

Xplorer2 Ultimate 4.5.0.1 (64-bit)
- Editor² build 2971 adds automatically managed frequent document list in FILE menu
- When switching to single pane mode, all tabs from old (closed) pane are saved, so you can restore them when you turn dual pane mode back on


Xplorer2 Ultimate 4.5.0.0 (64-bit)
- Optional UP-DIRECTORY (..) item by enabling GAO2_UPDIRITEM (=16384) advanced option. The famous NC item will be added for all filesystem folders allowing you to go up one level. It will also act as a drop target if you want to move anything up one level. In most folder sorting modes, this pseudo-item is placed first for easy access.
- Xplorer² communicates simple messages using the leftmost status bar pane. If the message is too long to be seen in its entirety, the panel will scroll the message FYI. You can also use HELP > LAST ERROR menu command to see the last error message, if you missed the statusbar text.
- [U] xplorer² 64-bit version will automatically use 32 bit text extraction filters, in case you have only 32 bit versions of them installed, so you can search in more advanced document types bypassing 32/64 bit hell! To turn off the new feature use advanced registry option GAO2_NOFBROKER32 (=4096)
- Find tab command dialog shows the full path of the selected item in the description area for easier identification
- Active path portion in the crumbBar is highlighted by underlining, accentuating the "click on link" mouse action. If you need even better visibility, you can change the "folder highlight color" using Advanced Options menu command.
- New friendlier dates activated with advanced registry option GAO2_PALDATE (=8192). They are easy to read AND offer more information than the older "friendly dates" (available from program options, Advanced property page ” you need to turn this option on too). Now you get at least 1-day accuracy for all files; for modification dates that are recent, you get up to minute accuracy (e.g. "last 10 minutes"). If you are sorting by a stock date column, the view automatically refreshes every 1 minute to show correct minute-accurate dates.
- NOTE: when friendly dates are on, you can see exact dates (including time) using the Details pane (VIEW menu)
- Advanced option GAO2_PRECISEDATES(=65536) ensures that file dates shown are always 1-second accurate for NTFS formatted hard discs. Note this flag will affect somewhat the folder reading speed, and the benefit isn't important for most people. Probably not needed for windows 10 either! (older windows may degrade date accuracy in 2-second intervals)
- $-counters (e.g. $1) used in mass rename can have an optional step size instead of the default increase by one. The step is defined after the starting digits separated by a colon, as $1:2 (will generate the sequence 1 3 5...) Remember that the counter token reflects the starting number and any leading zeroes: $003:5 will generate the sequence 003 008 013 ...
- Registry writes get to be a bit more efficient, only saving lists that have actually changed. This was quite a sweeping code change so please keep an eye open for any odd settings behavior (bookmarks and other custom lists).
- [U] export settings to INI file correctly saves all layout data, if any custom layouts are defined (see WINDOW menu); the side effect is that all layouts must be opened simultaneously (with your permission). Likewise switching saving program settings from registry to INI (or vice versa) will save all layout settings.
- For large files (above the checksum extraction limit set in TOOLS > OPTIONS) checksum [S]tock column will calculate the first 4MB (or whatever the limit is) and add the file size on top. So it will be an indication of file content for comparison purposes, at least better than no checksum at all for large files! This doesn't apply for the MD5 column, which is still constrained by the checksum limit.
- When a tree item is filtered and filtering is suspended, a right click context menu will show a checkmark next to "Hide this folder" command. Use the command to UNhide a tree node
- Copy/Move to dialog (F5/F6 keys) HERE box includes all bookmarks and frequent folders as targets for easy selection. In this box up-arrow autocomplete works: type part of the name of the path then hit up arrow key a few times till you see the desired folder selected.
- Ticking this SELECT option will automatically turn on sticky selection mode. To turn it off press <ALT+S> keys or see MARK menu.
- Global registry setting chRenDefault is the single character to use whenever illegal characters are inserted in filenames during renaming. The default value is _ (underscore). Leave empty so that all illegal characters are removed automatically (not just replaced).
- Advanced settings editor search box will automatically switch property page (from LAYOUT to GLOBAL etc) if a search term is not found. Helpful if you don't remember if a setting is global or layout-specific.
- New tips: 4b, 29a, 39a, 43b, 73a, 111c, 111d and 173a
- Various bugfixes and efficiency improvements


Xplorer2 Ultimate 4.4.0.1 (64-bit)
- Brazilian and Russian translations back online


Xplorer2 Ultimate 4.4.0.0 (64-bit)
- Sorry we have lost some of the translations that weren't really updated for a number of versions. I hope this will persuade some of the native speakers to volunteer and take over the abandoned projects. A free xplorer² license is offered to all translators!
- [P] TOOLS > BACKUP COPY menu copies all items (and their subfolders) from the active to the inactive pane (the backup location, e.g. a USB drive) using "overwrite if newer else skip" robust transfer option. This will only copy new and changed files, and skip those that are unchanged since the last backup. If you want to use a filter to exclude some files, use szBackupFilter registry tweak (see REGISTRY.TXT). This is not new functionality, only a convenient wrap-up of the robust copy dialog for the backup task.
- If using the ribbon UI, you will find this command under COPY TO button
- [P] ACTIONS > FILE PROPERTIES menu command sets any editable text properties (Author, Title, even Comment and Tags) for the selected items. You can both set, clear and even search and replace within existing values. The user interface is almost the same as for mass renaming; select the property of interest using the topmost drop-down list box in the dialog.
- If using the ribbon UI, you will find this command in WORKBENCH tab, under ATTRIBUTES button
- [P] The mass rename dialog has many options. You can save your favorite rename operations, including all options, search and replace strings and so on with a name, and repeat them again later. Use the PREDEFINED drop-down box to supply a name for the current options, then click SAVE button to store them. To delete a previously stored set, select it then hold down key while clicking on SAVE.

Any date $-tokens for mass rename and scripting allow date (and time) format to be specified on the spot using a : after the column name, e.g. ${Modified:yyMMdd HH:mm}. This way you can introduce sort-friendly dates in filenames as ${Date taken:yyyyMMdd}. For a description of the date/time format strings see here:
- [P] A registry setting (szExclusionFilter) defines a global exclusion filter for views and tree, hiding matching files and folders. It is a layout-specific setting, defined as a comma separated list of wildcards to EXCLUDE from view (alternatively it can be a saved hyperfilter name as those in FIND FILES dialog). When active, the hidden files statusbar icon will show as a reminder. Only relatively fast file properties can be used in the exclusion filter.
- The folder tree shows some folders twice, and some that people seldom use. You can hide folders you don't need using the tree context menu (xplorer² > HIDE THIS FOLDER) on the unwanted folders. To show all folders again right click on the tree background and tick off USE BLACKLIST menu option. Note only folders in the first few levels can be hidden.
- TIP: To UNhide a folder that was marked by accident, temporarily disable the blacklist, right click on the folder and use HIDE THIS FOLDER menu again. This acts like a toggle.
- All organize dialogs (bookmarks etc) come with a filter box to locate an entry quickly by keyword. Click on FIND NEXT button to select the next matching list item. Double-click on the item found to edit or activate it.
- WINDOW > FIND TAB menu will search for a tab by its (partial) path and activate it. All folder tabs are listed from both left and right panels.
- [P] When searching for duplicates and selecting them, xplorer² arranges the sort order by date so that the OLDER file in each group remains (it is not selected), and you can delete the newer duplicates, if that's what you want. Of course if the duplicate checking parameters include date, this sorting is pointless as all files will have the same dates by construction!
- [P] Details pane (VIEW > DETAILS PANE menu) shows document title and keywords when office documents are selected. If you know HTML you can choose exactly which file properties appear in this pane using a file called X2DETAILS.HTM, search the blog for more details.
- Compressed folder NSE (for 7z/RAR) updated to version 1.403: some bugfixes and upgraded to 7zip v19. For more details see
- Installer option to start xplorer² automatically whenever you boot in Windows (additional tasks page)
- For large DPI installations, the extra large (48x48) toolbar skin is automatically used, and a 32x32 skin is used for menus; that should make them more readable.
- New random sort mode (VIEW > ARRANGE BY > RANDOMLY menu) for those that need spice in their folders to fight everyday boredom
- Ctrl+mousewheel changes thumbnail size as well as view styles, so you can easily view huge thumbnail previews
- Editor² switches to large toolbar skin when in high dpi
- Various bugfixes and efficiency improvements
- New tips 9f, 64a, 64b, 64c, 111a, 111b
- [U] programmable column function DATE() converts strings to dates. Perhaps its most useful case is with an empty argument, which returns the current date. This can be used to calculate the file age in days e.g.
- DATE("") - ${Modified}
- [U] programmable column function EXISTS() checks the existence of its path argument and also returns the file type: 1 if it is a file, -1 if a folder, or 0 if nothing exists.

[U] programmable column functions FILE2 and FILEPROP can be used to compare the current item with others, e.g. for synchronization checks. FILEPROP can only fetch a single property, whereas FILE2 can execute any arbitrary expression on the second file. The example below tests if the file is newer than its namesake in E:OTHER folder:
- ${Modified} > FILEPROP(${Modified}, "E:other" + ${name})
- You can have only one FILE2 but as many FILEPROP as you need in an expression. See the documentation for more details. In the future these will be used for advanced overwrite control.


Xplorer2 Ultimate 4.3.0.2 (64-bit)
- Change log not available for this version


Xplorer2 Ultimate 4.3.0.1 (64-bit)
- Better handling of mass rename regular expressions, to be used for filename case changing. The down side is that now all search and replace regexp operations are case sensitive
- Dark shell context sumbenus and other small dark secrets
- Multi-monitor manifest is optional, must be selected during installation, because it causes problems for some users
- When you manually request folder sizes with <CTRL+D> keys, and if a folder item is selected, then size will be calculated just for the selected folders. This doesn't affect people that have folder size on all the time


Xplorer2 Ultimate 4.3.0.0 (64-bit)
- Welcome to the DARK side. Use TOOLS > ADVANCED OPTIONS menu command and turn on the fashionable dark mode (see the GLOBAL property page). It may be good for your eyes, or it may be just another fad, but you've asked for it and we delivered!
- Microsoft didn't make it easy for old school desktop programs like xplorer² to change window colors, so you will discover a number glitches, remnants of the default white-ish system colors here and there. In general things look best for windows 10.
- You can tell which pane is active by its slightly brighter dark background. Inactive panes are pitch black. If you need more distinct identification of inactive panes, select a background color from TOOLS > OPTIONS menu, but that is liable to upset the darkness. Alternatively tick the advanced option (TOOLS > OPTIONS menu again) to "Highlight active pane's titlebar as in 2xExplorer".

[P] Mass rename with regular expressions. Finally that long term disabled "RE" tickbox in FILE > MASS RENAME dialog is available for use.
This is a super advanced rename mode suitable for replacing parts of filenames with backreferences etc. Here is an example:
- filename = LOG.17112006.TXT
- regexp = (dd)(dd)(dddd) -> matches all digits in 3 (groups)
- replace with = $3-$2-$1 -> backreferences
- result name = LOG.2006-11-17.TXT -> inverted date YMD
- So using group operators in (brackets) and then $1 etc back references, you can rearrange parts of the filename, or remove them altogether. Parts of the filename that aren't matched, remain the same.
- To use regular expressions, tick the RE box and enter your regular expression in your WHAT TO MATCH field, then provide the replace string in the TARGET NAME TEMPLATE. Note the usual $-tokens in xplorer² cannot be combined with regular expressions.
- [U] MARK > FIND TEXT IN FILES (ctrl+G) has a tickbox to USE SEARCH INDEX, for super-fast content matching in the current folder. Note it cannot find special symbols or keywords that are not in the beginning of the word, as all cases of indexed search. If you need to search for exact text with symbols, untick this checkbox.
- New keyboard-only command CYCLENEXT (id = 33525) can be used to jump from one pane to another. Unlike past editions where you had to remember that <CTRL+TAB> keyboard combination jumped to the folder tree pane, <SHIFT+TAB> jumped to the addressbar and so on, now a single key cycles through all open panes. The recommended binding is key, but as this is already used, use CUSTOMIZE > KEYBOARD menu command, find command 33525 in the Miscellaneous category, and assign your favorite keyboard shortcut to it. Command #33526 cycles in the opposite direction.

Sorry some native mode preview handlers eat all keyboard shortcuts, so if you get stuck in one, the only solution is to click out with the mouse. Here's a reminder of other pane navigation keyboard shortcuts:
- TAB: Switch locally e.g. from the active to the inactive pane, or from the addressbar to the filter box
- ESC: Jump from any pane back into the active folder pane
- CTRL+ALT+LEFT: (or right arrow) Jump to previous or next tab
- ALT+Q: Switch previewer modes (native/draft tab)
- Advanced option GAO2_WEXPATTRS(=512) tells xplorer² to use explorer-friendly file attributes. Most attribute letters are the same, but there are some differences (L==junction etc). For more information see here https://superuser.com/questions/44812/windows-explorers-file-attribute-column-values
- Windows 10 version 1903 has sadly made an adverse turn in terms of managing files in very deep paths. Renaming/deleting files in deep folders works only in elevated mode (you must run xplorer² as administrator or use WINDOW > ADMINISTRATOR menu command). In transition folders you will need to use CTRL+F2 to supply a deep file or folder name
- xplorer² should look better if you have two or more monitors with different DPI resolutions
- Macro command POSITIVE can be used to test arithmetic operations whether they are positive or not.
- [U] Programmable column instruction DIRCNT, similar to Contents [S] column but more flexible. You can use it to count files under a folder given a wildcard, and specify if you want to count only files, only folders or both.
- [U] Programmable column instruction DATETIME formats a (file) date as you like it. For example DATETIME(${modified}, YYYY.MM.dd, "") will show the date as 2019.09.15 without any time information. This could be useful for mass renaming tasks or for general date formatting. Note you can also use the advanced settings editor if you need to customize how stock dates appear in xplorer².
- [U] A PREVIEW button was added in the programmable column definition dialog, that lets you test the expression on the selected item (in the active pane).
- Zoom image previewer (Draft tab) takes JPG photo/picture orientation tags into account and shows correctly rotated picture previews.
[P] similar picture locator (TOOLS > FIND SIMILAR PHOTOS menu command in a scrap window) can detect pictures that are (almost) the same and differ in rotation/orientation.
- $P token (selected item's folder path) now works even for empty folders
- New tips 51a, 98c and 164a.
- Internal editor² version 2.96 with better handling of high DPI screens. If you need it in dark mode, tweak the background colors to taste from program settings (VIEW > OPTIONS menu).
- All demo videos from HELP > HOW DO I? menu now shown in youtube. Quality is a bit worse but you don't need to worry about flash plugins.
various bugfixes and improvements


xplorer² Ultimate 4.2.0.1 (64-bit)
- cloud storage improvements for Google drive file stream and Box cloud drive


xplorer² Ultimate 4.2.0.0 (64-bit)
- Change log not available for this version

ADVANCED Codecs 相關參考資料