The Dude 6.45.1
Windows XP64 / Vista64 / Windows 7 64 / Windows 8 64 / Windows 10 64
What's new in this version:
- Due to removal of compatibility with old version passwords in this version, downgrading to any version prior to v6.43 (v6.42.12 and older) will clear all user passwords and allow password-less authentication. Please secure your router after downgrading Changes: - added support for IEEE 802.1X Port-Based Network Access Control - added support for EAP authentication methods (eap-tls, eap-ttls, eap-peap, eap-mschapv2) as initiator - removed insecure password storage - correctly display bridge FastPath status when vlan-filtering or dhcp-snooping is used - correctly handle bridge host table - fixed log message when hardware offloading is being enabled - improved stability when receiving traffic over USB modem with bridge firewall enabled - fixed CAP system upgrading process for MMIPS - fixed interface-list usage in access list - improved packet processing after overloading interface - added "key-type" field - added support for ECDSA certificates (prime256v1, secp384r1, secp521r1) - fixed self signed CA certificate handling by SCEP client - made RAM the default CRL storage location - removed DSA (D) flag - removed "set-ca-passphrase" parameter - legacy adapters require "disable-running-check=yes" to be set - added "replace" parameter for backup "upload-file" command - fixed GRE protocol packet connection-state matching (CVE-2014-8160) - significant stability and performance improvements - fixed known multicast flooding to the CPU - added ethernet tx-drop counter - correctly display auto-negotiation information for SFP/SFP+ interfaces in 1Gbps rate - fixed auto negotiation when 2-pair twisted cable is used (downshift feature) - fixed "tx-drop" counter - improved switch-chip resource allocation on CRS326, CRS328, CRS305 - added "custom-script" field that prints custom configuration installed by Netinstall - automatically set "installation" parameter for outdoor devices - changed default configuration type to AP for cAP series devices - fixed channel width selection for RU locked devices - create dual stack queue based on limitations specified on DHCPv4 server lease configuration - do not require lease and binding to have the same configuration for dual-stack queues - show warning in log if lease and binding dual-stack related parameters do not match and create separate queues - added "client-mac-limit" parameter - added IP conflict logging - added RADIUS accounting support with queue based statistics - added "vendor-class-id" matcher (CLI only) - improved stability when performing "check-status" command - replaced "busy" lease status with "conflict" and "declined" - added option to disable rapid-commit - fixed status update when leaving "bound" state - added additional RADIUS parameters for Prefix delegation, "rate-limit" and "life-time" - added "address-list" support for bindings - added "insert-queue-before" and "parent-queue" parameters - added RADIUS accounting support with queue based statistics - added "route-distance" parameter - fixed dynamic IPv6 binding without proper reference to the server - override prefix pool and/or DNS server settings by values received from RADIUS - correctly create neighbors from VLAN tagged discovery messages - fixed CDP packets not including address on slave ports (introduced in v6.44) - improved neighbour's MAC address detection - limit max neighbour count per interface based on total RAM memory - show neighbors on actual mesh ports - include "message-id" identification field in e-mail header - properly release e-mail sending session if the server's domain name can not be resolved - added support for 25Gbps and 40Gbps rates - fixed running (R) flag not present on x86 interfaces and CHR legacy adapters - increased loop warning threshold to 5 packets per second - added SFTP support - improved user policy lookup - fixed fragmented packet processing when only RAW firewall is configured - process packets by firewall when accepted by RAW with disabled connection tracking - fixed missing minus close to zero coordinates in dd format - make sure "direction" parameter is upper case - strip unnecessary trailing characters from "longtitude" and "latitude" values - use "serial0" as default port on LtAP mini - added "interface-mac" variable to HTML pages - moved "title" HTML tag after "meta" tags - adjusted debug packet logging topics - added support for ECDSA certificate authentication (rfc4754) - added support for IKE SA rekeying for initiator - do not send "User-Name" attribute to RADIUS server if not provided - improved certificate verification when multiple CA certificates received from responder - improved child SA rekeying process - improved XAuth identity conversion on upgrade - prefer SAN instead of DN from certificate for ID payload - improved logging for IPv6 Pool when prefix is already in use - added dynamic comment field for "active-peers" menu inherited from identity - added "ph2-total" counter to "active-peers" menu - added support for RADIUS accounting for "eap-radius" and "pre-shared-key-xauth" authentication methods - added traffic statistics to "active-peers" menu - disallow setting "src-address" and "dst-address" for transport mode policies - do not allow adding identity to a dynamic peer - fixed policies becoming invalid after changing priority - general improvements in policy handling - properly drop already established tunnel when address change detected - renamed "remote-peers" to "active-peers" - renamed "rsa-signature" authentication method to "digital-signature" - replaced policy SA address parameters with peer setting - use tunnel name for dynamic IPsec peer name - improved system stability when receiving bogus packets - renamed SIM slots "up" and "down" to "2" and "3" - added initial support for Vodafone R216-Z - added passthrough interface subnet selection - added support for manual operator selection - allow setting empty APN - allow to specify URL for firmware upgrade "firmware-file" parameter - do not show error message for info commands that are not supported - fixed session reactivation on R11e-LTE in UMTS mode - improved firmware upgrade process - improved "info" command query - improved R11e-4G modem operation - renamed firmware upgrade "path" command to "firmware-file" (CLI only) - show alphanumeric value for operator info - show correct firmware revision after firmware upgrade - use default APN name "internet" when not provided - use secondary DNS for DNS server configuration - added support for additional Serial Console port on GPIO headers - added support for link scope opaque LSAs (Type 9) for OSPFv2 - fixed opaque LSA type checking in OSPFv2 - improved "unknown" LSA handling in OSPFv3 - added "verify-server-certificate" parameter for OVPN client (CVE-2018-10066) - added initial support for Quectel BG96 - increased minimal free RAM that can not be used for proxy services - improved system stability when receiving bogus packets - fixed MAC address duplication between sfp-sfpplus1 and wlan1 interfaces (wlan1 configuration reset required) - improved system stability ("/system routerboard upgrade" required) - renamed 'sim' menu to 'modem' - fixed S-35LC20D transceiver DDMI readouts after reboot - added USSD message functionality under "/tool sms" (CLI only) - allow specifying multiple "allowed-number" values - improved delivery report logging - added "dot1dStpPortTable" OID - added OID for neighbor "interface" - added "write-access" column to community print - allow setting interface "adminStatus" - fixed "send-trap" not working when "trap-generators" does not contain "temp-exception" - fixed "send-trap" with multiple "trap-targets" - improved reliability on SNMP service packet validation - properly return multicast and broadcast packet counters for IF-MIB OIDs - accept remote forwarding requests with empty hostnames - added new "ssh-exec" command for non-interactive command execution - fixed non-interactive multiple command execution - improved remote forwarding handling (introduced in v6.44.3) - improved session rekeying process on exchanged data size threshold - keep host keys when resetting configuration with "keep-users=yes" - use correct user when "output-to-file" parameter is used - improved stability when received traffic hits tarpit firewall - added IPv6 ND section to supout file - added "kid-control devices" section to supout file - added "pwr-line" section to supout file - changed IPv6 pool section to output detailed print - properly reapply settings after switch chip reset - added "max-block-size" parameter under TFTP "settings" menu (CLI only) - improved link fault detection on SFP+ ports - added LTE CQI and IMSI parameter support - fixed potential memory corruption - improved error reporting with incorrect firware upgrade XML file - improved stability when sending large ping amounts - improved stability when stopping traffic generator - removed "local-address" requirement when "ipsec-secret" is used - added support for "Delegated-IPv6-Pool" and "DNS-Server-IPv6-Address" (CLI only) - do not show unused "dmg" paramete - prefer AP with strongest signal when multiple APs with same SSID present - show running frequency under "monitor" command - added "System/SwOS" menu for all dual-boot devices - do not allow setting "dns-lookup-interval" to "0" - show "LCD" menu only on boards that have LCD screen - fixed frequency duplication in the frequency selection menu - fixed incorrect IP header for RADIUS accounting packet - improved 160MHz channel width stability on rb4011 - improved DFS radar detection when using non-ETSI regulated country - improved installation mode selection for wireless outdoor equipment - set default SSID and supplicant-identity the same as router's identity - updated "china" regulatory domain information - updated "new zealand" regulatory domain information - improved client-initiated renegotiation within the SSL and TLS protocols (CVE-2011-1473)
Download The Dude 6.45.1 (Free) for Windows
Download The Dude 6.45.1 for Windows. The Dude Network Monitor is a program which helps you enhanced the way you administer your network environment.
The Dude - Download
4 天前 - The Dude is a freeware network monitoring software app filed under network ... The Dude 6.45.1 is available to all software users as a free ...
The Dude Download (2019 Latest) for Windows 10, 8, 7 - FileHorse
5 天前 - Latest Version: The Dude 6.45.1 LATEST. Requirements: Windows XP / Vista / Windows 7 / Windows 8 / Windows 10. User Rating: Click to vote.
The Dude（网络监控器）-The Dude中文版下载6.45.1-新云软件园
The Dude是一款方便实用的网络监控器软件，能够有效地帮助用户改进网络管理方式，支持ping检测到端口探测和服务检查的多样化网络监视任务，监视你设备的 ...